How does DIRECTV hook up to your TV?

It is very easy to hook up your DIRECTV service to your television and here is how you can do it in a few simple steps. To begin, you must decide whether you want a professional installation or if you wish to install your DIRECTV yourself. Some customers prefer to get the systems installed by technicians as these people will get everything in order and fine-tune the equipment. However, if you are quite experienced in technology, then you could install it yourself.

If you choose to go through a DIY installation of DIRECTV, the first thing that you will require is the right equipment from the DIRECTV company. This consist of the satellite dish, receivers, cables and any other hardware that helps you to receive the satellite signal and bring it to your TV. As for DTH, they will often provide you with all the equipment you need to get the service with the order. After getting everything, the initial step is to identify where you should install the satellite dish outside your home. It is most effective if located to look at the southern horizon and firmly mounted on the wall or a pole. Place the dishes properly, so that you get the best signal you can possibly get.

Once you have positioned the dish correctly, you can start building the inside connections. First, use the cable from the satellite dish and connect it to any of the input port present at the back part of your DIRECTV receiver. It is very important to note that the connections should be tight. If you have a DVR receiver it may have many sockets into which you can connect both the satellite cable and an off-air antenna. Third, connect an HDMI or AV cable from the receiver output to an available port on your television. HDMI is preferred when it is available because it can transport video as well as audio in high quality depending on the input that your TV has. In case your TV is old, then you may be compelled to use composite AV cables rather than the HDMI.

After all the hardware has been connected, the satellite dish has to be properly oriented to capture the signals that are being relayed by the DIRECTV satellites in orbit. This involves aligning the tilt, the rotation and position of the dish with the signal strength meters in your receivers. Often, there is always some trial and error when trying to fine-tune the angles and positioning of the equipment. In its installation manuals, DIRECTV has provided some recommendations that are aimed at achieving good signal reception. It also wouldn’t be too bad to have someone else verify the signal readings while you are moving the ladder and dish.

When you get the desired signals from the satellite dish alignment, you can proceed to switch on the DIRECTV services. Dial the activation number or visit the website to link your receivers to your account. Then you can use your remote control to turn on your TV and receiver, where you are guided by the instructions displayed on the screen. This encompasses choosing your preferred language, calibrating the remote control for your Television, linking your receivers to the internet for On Demand services, putting in place a lock if you so wish among others. Spend some time to go through every single feature and setting available on the DIRECTV menu to enable you find the most suitable programming for you.

Even though professional installation is far easier and error-free most of the time, installing your own DIRECTV equipment can be a fun do-it-yourself project if you also know how to deal with TV configurations, cables, mounts, and satellite equipment. As long as the owner installs the dish accurately and securely by himself , then the signal strength can be as needed. To be very honest, if one pays attention to the guidelines provided in the DIRECTV support section and the other manuals that come with the various pieces of equipment, it is very possible to connect all the systems properly without the assistance of a technician. But if at any time the installation become unbearable, do not hesitate to call DIRECTV or if you are willing to spend more, you can hire a professional to help you install it. If one wants to, they can easily achieve the goal of watching DIRECTV programming on their own television with the help of right advice and proper equipment.